TTuned Horse Power Heroes!
Posted 27 October 2010 - 09:55 AM
Rules: Must have Dyno Readout sheet posted.
Must have Spec posted as this.
Have fun guys!
Posted 27 October 2010 - 04:22 PM
Can't find dyno sheet atm, will look for it.
Posted 28 October 2010 - 07:06 AM
Posted 27 November 2010 - 08:58 PM
Posted 27 November 2010 - 11:17 PM
fkn crank that shit matt!!
Posted 27 November 2010 - 11:41 PM
fkn crank that shit matt!!
Haha I saw it earlier and thought I'd let be No.1, just for a bit lol. Anyways it's gonna make way more once I put in my 1000cc, run a toluene mix and crank 1.5 bar into it...
Posted 28 November 2010 - 11:15 AM
Posted 09 December 2010 - 08:05 PM
been through a few turbo setups since then... aiming for the 500rwhp with 2j, 35r, 264 cams, emanage, 650cc sards etc etc...
Posted 18 December 2010 - 03:28 PM
We're Adding 1100cc injectors and a dual feed rail, HKS 272/9.3 cams and another 044 and tuning for 450rwkw/600rwhp on 98ron pump fuel.
| Ben | 2JZGTE | Trust T78-33D 17cm | 304.7rwkw/408.6RWHP | 17PSI
No dyno sheet by here is a video of the dyno run and the graph displayed.
Posted 28 April 2011 - 02:35 PM
Posted 16 May 2011 - 08:35 PM
Punching cat and taking out a muffler and going for 220+
Posted 22 June 2011 - 07:40 AM
Posted 22 June 2011 - 07:59 AM
Posted 22 June 2011 - 11:29 AM
Posted 22 June 2011 - 03:17 PM
It won't hold 18psi so there's no point pushing it any further. I've got a new turbo set up on order! Gtx35r/ 6boost/22psi etc. Check members rides
Posted 22 June 2011 - 03:49 PM
Posted 22 October 2011 - 03:29 PM
will be more after a new tune as its running rich on boost
Edited by FST 02J, 22 October 2011 - 03:30 PM.
Posted 01 November 2011 - 08:32 PM
Posted 10 January 2012 - 08:29 AM
THats a awesome outcome!! my steel wheel ct12's are good for 20psi or something, so hoping for 250rwkw
Posted 10 January 2012 - 08:35 AM
Standard exhaust, standard cooler, standard intake, standard boost... standard everything!
3" exhaust, de cat, 13psi of boost using ebc. Still standard cooler & intake
Current set up -
twin steel wheel ct12s, twin dump pipes, 3" front pipe, front mount, walbro, hard intake with pod. Turbos good for 20psi+.
DYNO SHEET STILL TO COME!!
Edited by adavis59, 10 January 2012 - 08:37 AM.
Posted 15 February 2013 - 12:25 PM
Any more high HP Toyota's floating around?!
Posted 15 February 2013 - 02:51 PM
Posted 02 April 2013 - 07:26 PM
I can't seem to find the actual dyno sheet but I'll put it up when I do. This is a comparison chart I made from the data on the sheets.
Engine: 1.5JZ (2JZ-GE bottom end)
Turbo: Garrett GT3082R 0.82 exhaust housing - 19psi
Mods: Standard head and block, china exhaust manifold, china bar/plate front mount, 3" exhaust, 540cc injectors, Microtech LTX12, Bosch coils, MSD leads, OS Giken twin plate, upgraded R154
302kw/405hp - 938NM torque
Posted 02 April 2013 - 07:36 PM
Edited by greens14, 02 April 2013 - 07:37 PM.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users