Search the Community
Showing results for tags 'air compressor'.
Found 1 result
Hey guys, thought i would post up my half finished air compressor set up behind my back seat. the whole thing isnt finshed yet, i still want to run a 18lt tank underneath the back tray or behind the bull bar and have air fittings either side of the car. i have some pictures to give you some ideas of how you might want to do it; here are some pictures; Here is the compressor behind the seat nice and neat. I found an old bit of timber at home sprayed it black, cut up some coolant hose and used it under the compressor when i screwed it to the wood for a bit of absorbsion. I pinched a Clipsal junction box from my bros van to mount the switch, hide the wiring and hide the relay and of course sprayed black. I then glued rubber underneath the timber also to absorb the viabrations. Last but not least i made a bracket from my seat belt buckle mount to hold the assembly in position. I have drawn up a wriring diagram (pretty shitty one) just so it gives a rough guide of hoe to wire it, it requires a relay because these compressors normally draw 30amps or more, to find a 30 amp switch is pretty hard so running a 30amp relay with a switch is the go. I have also wired in a fuse in the amp to relay wire for a little protection. hopefully this is a bit of info for you guys but if you want to see it in person, or have any questions just send a PM cheers brett