Jump to content
Sign in to follow this  
i want a silvia

NISSAN FAST Thread (Thread Now Closed)

Recommended Posts

 

After the part number for the left front ABS sensor assembly - (lead from sender to wheel, I believe?)

Is this the same as the Aussie Model?

 

Also require spec's / demensions on the Fuel Pump & part number. (As want to upgrade in-tank pump, with minimal mods).

 

Keep up the great work!

 

Cheers,

Sean

 

U13 SR20DET Front Left ABS Sensor - 47911-0E000

 

No idea if it is the same as Aus spec (my copy of FAST doesn't do Aus vehicles), but it might be, best to ask Nissan Spares (they have Aus FAST).

 

Fuel Pump - 17040-0E600

 

Can't help with dimensions either sorry, FAST doesn't go into that much detail on the parts.

Share this post


Link to post
Share on other sites

 

After the part number for the left front ABS sensor assembly - (lead from sender to wheel, I believe?)

Is this the same as the Aussie Model?

 

Also require spec's / demensions on the Fuel Pump & part number. (As want to upgrade in-tank pump, with minimal mods).

 

Keep up the great work!

 

Cheers,

Sean

 

U13 SR20DET Front Left ABS Sensor - 47911-0E000

 

No idea if it is the same as Aus spec (my copy of FAST doesn't do Aus vehicles), but it might be, best to ask Nissan Spares (they have Aus FAST).

 

Fuel Pump - 17040-0E600

 

Can't help with dimensions either sorry, FAST doesn't go into that much detail on the parts.

 

Thanks for that!

Cheers

Share this post


Link to post
Share on other sites

Howdy,

 

Looking for the part numbers for the front and rear thermostat housing for 1991 redtop SR20DET

 

mine has corroded through

 

post-74164-12856351972799_thumb.jpg

 

Many thanks

Share this post


Link to post
Share on other sites

Looking for the part numbers for the front and rear thermostat housing for 1991 redtop SR20DET

 

Rear Housing - 11061-52F05

Front Housing - 13049-52F00

Share this post


Link to post
Share on other sites

Hi :)

Looking for part numbers for the plastic tabs/screws (whatever they actually are) that hold both kick panels (ECU - passenger & Fusebox - driver) in place for a s13/180.

 

Mine seem to be missing them and rattle a lot whenever I hit any bump in the road.

 

I wonder if I can get these through Nissan or supercheap etc? :S

 

Cheers

Share this post


Link to post
Share on other sites

^^ Kickpanel screws are 08510-61697

 

They just look like a very large woodscrew. You could probably find something pretty close at Bunnings.

Share this post


Link to post
Share on other sites

Hi,

 

Could I please get the part numbers for window seals, door seals and trims (that go around the top of the drivers and passengers windows) and boot seal - when you get a chance?

Suit HCR32 R32 GTSt (BNR32 GTR should be the same)

 

Thanks heaps :)

Share this post


Link to post
Share on other sites

Hi, sorry, it is 1990 and yes, a 2 door

 

Thanks again

Share this post


Link to post
Share on other sites

I think these are correct.

 

Boot seal - 84830-04U00

Window Seal (LH)- 76861-04U01

Window Seal (RH)- 76860-04U01

Door Seal (LH) - 80831-04U10

Door Seal (RH) - 80830-04U10

 

The trim I can not find, it doesn't also hold the window seal in does it, because there is a listing for the window seal retainers.

Share this post


Link to post
Share on other sites

Hi. Yes it is a retaining type thing for the seals, cheers

 

Would you also be able to get the numbers for the front and rear window seals and perhaps rear 1/4 window seals too?

 

Thanks again for your help, really useful, cheers

Share this post


Link to post
Share on other sites

Front Window Seal Retainer (LH) - 76871-04U00

Front Window Seal Retainer (RH) - 76870-04U00

 

From my experience with S13's (which appears to be the same for the R32) there are no seals for the front/rear windscreens as such. They are glued in place and then these pieces of rubber moulding are pressed into grooves around the window and then it is covered by a piece of trim.

 

The quarter windows are completely glued on. And then covered with trim - no rubber mouldings.

 

The moulding for the rear windscreen is:

 

79780-04U10 for vehicles 05/89-10/90

79870-04U15 for vehicles 10/90- on

 

The moulding for the front windscreen is:

 

72725-04U10

Share this post


Link to post
Share on other sites

Thanks again, I don't suppose you know how to tell if it is pre/post Oct '90 do you?

 

Cheers

Share this post


Link to post
Share on other sites

PM me the Japanese Vin number.

 

It will be on the Japanese build plate in the engine bay and will be in the format R32 XXX XXX (or HRC32 XXX XXX, etc). Basically you are looking for the vehicle model code followed by 6 numbers.

 

I can run that through FAST and find out exactly when it was built.

Share this post


Link to post
Share on other sites

If you could please confirm the part number for the rear wheel studs for a 99 jdm S15 that would be much appreciated

Share this post


Link to post
Share on other sites

^^ Nissan do not sell the studs separately, they sell the hub as a unit which includes the studs.

Share this post


Link to post
Share on other sites

Damn, i was under the impression i could buy them seperately. Thank you for your help anyway

Share this post


Link to post
Share on other sites

I have a challenge for you ...

 

I need the part number for a 1979 Datsun Stanza 2 Door Coupe, KPA10 - Passenger side, rear quater vent window glass (one that can be 'popped' open from the back seat)

 

:ph34r:

Share this post


Link to post
Share on other sites

Ahh damnit .. where would i get such a listing ??

Share this post


Link to post
Share on other sites

Sorry I should have said, my copy of FAST has no listings for the A10.

 

You would have to try Nissan directly. If Nissan is still supporting that vehicle with spare parts then their copy of FAST will have the listing.

Share this post


Link to post
Share on other sites

s13 sr20det manual shifter circlip?

 

thanks!

 

As in the ones that hold the shifter into the gearbox?

 

There are 2 of those.

 

32204-V5004 - Upper

32204-V5003 - Lower

Share this post


Link to post
Share on other sites

Could i get the part numbers of the 4 bolt Half Shafts from the S13 SR20DeT R200 diff please mate :)

Edited by Kalman

Share this post


Link to post
Share on other sites

Could i get the part numbers of the 4 bolt Half Shafts from the S13 SR20DeT R200 diff please mate :)

 

There are no 4 bolt half shafts, they come in either 5 or 6 bolt.

 

I can get the part numbers if you want, but I recommend buying them off Yahoo Japan rather than trying to buy new through Nissan, they will be cheaper.

 

Here's some 5 bolts I found:

http://www.importmonster.com.au/view?url=http://page8.auctions.yahoo.co.jp/jp/auction/h144735459&thumb=http://f0.auctions.c.yimg.jp/img205.auctions.yahoo.co.jp/users/6/2/8/7/bakacom_yazuya-thumb-128177392325479.jpg&title=PS13%20180SXS14S15R32

 

Contact Streeter if you want to buy them.

dartsun75@gmail.com

Share this post


Link to post
Share on other sites

Hi, I'm after these part numbesr for the A/C system......180sx 1992 sr20det. I'm after the "TX valve" near the exchanger under the dash, ( its a little pressure valve ) the filter/dryer ( pad type ) up front at the bumper and also new stock or nismo front strut tops please?

Share this post


Link to post
Share on other sites

That site is brilliant. Thanks mate

 

when you use import munster go to the original yahoo page sent that to jessy streeter and save heaps of cash :thumbsup:

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

×